23 February 2008

Cold Storage / Freezer Room System

Cold Storage panels is a rigid foam polyurethane with density 40 kg/m3 in between white coated galvanized sheet on both sides. The panels are usually call as sandwich panel. The Panels are knock down system with cam lock joints to make it easy to install, remove and relocated.

Panels thickness are 10 cm, 12,5 cm and 15 cm. More bolt the thickness more heat transfer reduce thorough the wall panels.

Panel knock down system installed multiply to 1,2 m long, with 6 m maximum high. If panel do not knock down system, the size are not limited.

Door will installed heater in the side of the door to prevent ice formulated and stick the door to the frame. Door have 2 or 3 hinges, and one door lock.

Evaporator hanging below ceiling in the side of the cold room. The location of evaporator installed will circulate cold air in the cold room properly, and reaching equal temperature in all area.

Safety

Door can open from inside, for safety reason when some body inside by accident the door is closed. If the door could not open from inside, we provide emergency push button switch. If some body trap inside and push this emergency button the emergency lamp will turn on and emergency siren will sound.

No comments: